GGCZ 系列智能化高频感应加热电源装置

高频淬火设备www.wxdianlu.com详细介绍：
　　主要配置与性能
　　Main configuration and performance

　　1.高频调压采用模块锁相环数字脉冲触发电路，三相不平衡度小于0.4%。
　　2.回路采用晶闸管模块组件，不通水、体积小、可靠性高。
　　3.灯丝供电采用恒压器，稳压精度高，寿命长，节能显著。
　　4.灯丝栅极风冷式，隔直流采用大容量、高耐压云母电容。
　　5.整流变压器采用低损耗变压器。
　　6.输出变压器具有二维调节功能，感应器与工件相对位置调整极为方便。
　　7.设备具有过电压、过电流、欠水压保护功能。
　　8.控制回路具有软启动、稳压功能。
　　9.与数控淬火机床、内循环冷却系统组成成套设备，自动化程度极高，控制精度及零件热处理一致性和合格率高。
　　10.设备一键开机，一档预热、二档预热、加热自动程序进行。
　　11.设备构件防锈、防磁。
　　12.仪表显示数字化可智能化控制。

　　1.Voltage regulating with high frequency adopts modular phase-locked digital pulse trigger circuit.Unbalance degree of three-phase is lower than 0.4%.
　　2.Main circuit adopts thyristor modular. Water doesn’t go through it. It has small volume and high reliability.
　　3.Electric supply of filament adopts constant voltage device, which has high voltage stabilizing accuracy, long life and distinct energy-saving efficiency.
　　4.Filament rid adopts air-cooling. Blocking adopts large capacity and high voltage resistance mica condenser.
　　5.Rectifying transformer is low consumption transformer.
　　6.Output transformer has 2-dimensional regulating function, which makes center alignment of inductor and workpiece be easy.
　　7.This generator also has functions as over voltage, over current and protecting water pressure lacking.
　　8.Control circuit has functions as soft starting and voltage stabilizing.
　　9.Numerically-controlled hardening machine, inner circular cooling system and this generator constitute complete installation, which has high　automaticity, high control precision, high consistency of component heat-treating and high percent of pass.
　　10. One-key start-up function, the procedures of 1st preheat option, 2nd preheat option and auto heating are running.
　　11. The components are made of anti-rust and anti-magnetic materials.
　　12. The instrument display enables digital and intelligent control.